Basic Setup; Step 1: Connect The Bnc Cameras; Step 2: Connect The Mouse; Step 3: Connect The Ethernet Cable - Lorex ECO 2 Instruction Manual

Basic Setup

Step 1: Connect the BNC Cameras

• Connect BNC cameras to the Video In ports on the rear panel of the DVR.
8-channel model shown

Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the USB ports on the rear panel of the DVR.
8-channel model shown
USB ports

Step 3: Connect the Ethernet Cable

• Connect an ethernet cable (included) to the LAN port on the rear panel of the DVR. Connect
the other end of the ethernet cable to a router on your network.
8-channel model shown
LAN port
Connect ethernet cable
Push and twist the BNC
connector clockwise to
secure it to the BNC port.
Basic Setup
7