Table of Contents
Advertisement
Setup
To configure the Menu Time Out duration:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then System.
2
Under Menu Time Out, select the Menu Time Out duration.
NOTE: To create a custom Menu Time Out duration (between 1~60 minutes), click Custom. Then
use the on-screen keyboard to select a time and click Save & Exit.
3
Click Save to save your changes, and click Exit to return to Live Viewing mode.
Changing the DVR Name
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then System.
2
Click DVR Name. Use the on-screen keyboard to create a DVR name and click Save & Exit.
3
Click Save to save your changes. Click Exit to return to Live Viewing mode.
Configuring Error Notifications
Error Notifications (such as the system buzzer or email alerts) can be configured for
system errors. System errors include the following conditions:
• HDD Full: The hard drive becomes full and overwrite is not enabled, so the DVR can no longer
record. Enable overwrite (see "Disabling/Enabling Overwrite" on page 45), replace the hard
drive, or install an additional hard drive (see "Appendix D: Hard Drive Installation" on page 136).
• Video Loss: A camera has suffered video loss. This may occur if the camera loses power, the
extension cable is cut, or the camera is disabled by a vandal.
• Fan Failed: The internal fan has failed. Contact Lorex Technical support.
58
Select a Menu Time Out
duration
Click to create a custom
DVR name
Advertisement
Table of Contents
