Table of Contents
Advertisement
Miscellaneous
• VGA Adjustment (8-Channel Only): Press
when connected to a VGA monitor.
Configuring the Screen Saver
The Screen Saver will turn off the screen automatically at certain times during the day or
when the system is idle. When the Screen Saver is activated, move the mouse or press one
of the front panel buttons to turn the screen back on.
To configure the screensaver:
1
From Live Viewing mode, right-click to access the Main Menu. Click Miscellaneous then
Display Setting.
2
Click the button next to Screen Saver to open the Screen Saver Menu.
3
Under Enable click to select On to enable the Screen Saver or Off to disable.
Example: Screen Saver starting at 14:00
(2:00PM), ending 8 hours later at 22:00 (10PM).
4
Under Duration, select 24 to enable the Screen Saver at all times or select the duration the
Screen Saver will be active for.
• If Duration is lower than 24, under Starting, select the time you would like the Screen Saver
to start each day.
74
to adjust the horizontal position of the display
Click to configure Screen Saver
Click On/Off to enable/disable the Screen Saver
Select 24 to enable the Screen Saver at all times.
Select anything else to set the duration of the
Screen Saver
Select the starting time for the Screen Saver
Select the Screen Saver idle time
Advertisement
Table of Contents
