Table of Contents
Advertisement
3
Under the channel you want to enable audio events on, double click under Audio and select
On to turn on audio events.
4
Click Save to save your changes, and click Exit to return to Live Viewing mode.
Changing the Recording Resolution and Quality
The recording resolution and quality affects the quality and frame rate of recorded images.
Increasing the resolution or quality will provide a better image, but will reduce the
maximum frame rate available.
NOTE: On 8-channel models, you cannot change the
recording resolution using the menu. To change the
recording resolution on 8-channel models, power
off the DVR by pressing the power button and
entering the admin password (default: 00000).
Then change the #2 INPUT/OUTPUT switch to Down
for 720p or Up for 1080p. When you power the DVR
on, the resolution setting for all cameras will be set
to your selection.
To change the recording resolution and quality:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Recording tab.
Double-click to select
recording resolution
3
4-Channel Only: Double-click under Resolution for the channel you want to change and
select 1080p (high) or 720p.
4
Double-click under Quality for the channel you want to change select the recording quality.
5
Click Save to save your changes and click Exit to return to Live Viewing mode.
Changing the Recording Frame Rate
You can set a separate recording frame rate for Continuous Recording or Event Recording.
This is useful, for example, if you want the frame rate to increase when motion is detected.
Double-click to select
recording quality
8-Channel Model:
Select recording
resolution using
switch #2:
Up: 1080p
Down: 720p
Click Save
Setup
39
Advertisement
Table of Contents
