Basic Setup
Basic Setup
Step 1: Connect the Cameras
• Connect the HD-SDI cameras to the CAMERA INPUTS ports on the rear panel of the DVR. For
details, see "Connecting Cameras" on page 10
NOTE: Make sure to include some slack in the extension cable on both ends when connecting
to the DVR. Strip lines may appear in the image if the cable is too tight.
Step 2: Connect the Mouse
• Connect a USB mouse (included) to one of the USB ports on the front panel of the DVR.
USB ports
6
Push and twist the BNC connector clockwise
to secure it to the BNC port.
.