Setting The Date And Time - Lorex LHD100 SERIES Instruction Manual

Setting the Date and Time

To set the date and time:
1 In Live Viewing mode, right-click on the screen and click Setup. Select the Date & Time tab.
2 Under Date & Time, double-click the sections of the date or time you would like to change,
and then click the up and down arrows to set the date and time.
NOTE: Time is displayed in 24-hour format.
3 Click Save to save your changes. Click Exit to return to Live Viewing mode.
19
It is highly recommended to set the date and time when first
setting up your system.
Inaccurate time stamps may render your footage unusable for
court evidence.
Click Save
Double-click the sections of
the date and time you would
like to change.
Click the up and down
arrows to set the date and
time.