Enabling Ddns - Lorex LHD100 SERIES Instruction Manual

Setup
3 Under Ethernet Type, select DHCP or Static. If you select Static, configure the following:
• IP Address: Enter the desired IP address. Make sure that the IP address chosen not being
used by another device.
• Subnet Mask: Enter the subnet mask.
• Default Gateway: Enter the gateway address.
• Primary DNS: Enter the primary DNS server address.
• Secondary DNS: Enter the secondary DNS server address
4 Click Save to save changes. Click Exit to return to Live Viewing.
5 Restart the DVR using the power button. You will need to enter the admin password (default:
00000).
NOTE: If you have already set up port forwarding, you will need to re-complete port forwarding
using the new IP address.

Enabling DDNS

DDNS allows you to connect to your system remotely. You must create a DDNS account,
and enter your DDNS settings into the system before you can remotely view your system.
For details on creating a DDNS account, see "Step 2 of 4: Create a DDNS Account" on
page 86.
To enable DDNS:
1 Right-click to open the Main Menu and click Setup.
2 Click Network and select the DDNS tab.
3 Under DDNS Enable, select LorexDDNS.
4 Under Domain Name, enter your Domain name/URL Request from the confirmation email
that was sent after you created your DDNS account. Click Save & Exit to confirm.
Example of entering DDNS information in the DDNS tab
NOTE: If the Domain name/URL request is
http://tomsmith.lorexddns.net .
to connect to your system using Internet Explorer.
50
tomsmith
tsmith01
******
tomsmith
See Web connection example for the DDNS address used
Select LorexDDNS
Domain Name: Enter Domain name/
URL Request
User Name: Enter DDNS User Name
Password: Enter DDNS Device password
, the address to access your video will be