Setup
To change Sound Sensitivity:
1
From Live Viewing mode, right-click to enter the Main Menu and select Setup. Click Camera
and select the Event Source tab.
2
Double-click under Sound Sensitivity to set the sensitivity for audio events.
3
Click Save to save your changes, and click Exit to return to Live Viewing mode.
Configuring Motion Detection Areas
Motion Detection Areas allow you to enable or disable motion detection in certain areas.
For example, you can disable motion detection where your camera overlooks a public
street and enable motion detection to trigger when someone enters your driveway.
You must enable Motion Events in the Recording Menu to enable motion recording.
To configure Motion Detection Areas:
1
From Live Viewing mode, right-click to enter the Main Menu and click Setup.
2
Click Camera and select the Event Source tab.
34
Double-click
to change the
Sound
Sensitivity