Expansion Slot - Canon LBP5360 User Manual

7
8
9
9-28 Installing a Hard Disk
Insert the ROM module into the slot guides so that its notch
(A) is at the opposite side of the lever (B), and then press the
ROM module completely into the slot.
(B)
When the ROM module is installed properly, the projection of the lever is caught in
the notch (C) of the ROM.
Remove the screws and remove the protective plate for the

expansion slot.

IMPORTANT
• The removed protective plate and screws are required when the hard disk is
removed. Keep them where they will not get lost.
(C)
(A)