Substitute Size; Sp.image Mode - Canon LBP5360 User Manual

IMPORTANT
For automatic 2-sided printing, <41 CHK PAPER SZE> always appears and the
printer stops printing regardless of the setting for this item.

SUBSTITUTE SIZE

OFF*, ON
When the paper cassette for the paper size to be used is not set in the printer, the
printer switches the paper source to the following paper cassettes and prints.
Printer Driver Setting
A4
Letter
If ON is specified, the printer switches the paper size.
If OFF is specified, the printer does not switch the paper size but stops printing,
displaying an error message.
NOTE
Even if ON is specified, the printer does not switch the paper size when the paper
source for the paper size is empty.

SP.IMAGE MODE

OFF*, LEVEL1, LEVEL2
Toner on the parts dense in color may not fix onto the paper and not printed
properly. In this case, specify LEVEL1 for this item. If the problem is not solved by
specifying LEVEL1, specify LEVEL2.
IMPORTANT
If this solves the problem, reset the setting to the default value, OFF.
•
If LEVEL1 or LEVEL2 is specified, the print density may be lighter than when OFF
•
is specified because the printer prints with the toner consumption adjusted.
Size of the Paper to
Be Printed
➞
Letter
➞
A4
SETUP Menu Settings
6
6-53