Std Paper Size - Canon LBP5360 User Manual

6

STD PAPER SIZE

6-24 SETUP Menu Settings
IMPORTANT
When you change the paper loaded in the paper cassette frequently, it is
•
convenient if you set CASSETTE(n) SIZE (n = 1, 2) to MIXED SIZES. When
CASSETTE(n) SIZE (n = 1, 2) is set to MIXED SIZES, you do not need to specify
the setting for CASSETTE(n) SIZE (n = 1, 2) each time you load different size
paper. However, when specifying MIXED SIZES, make sure that the size of the
loaded paper matches the paper size specified in the printer driver before printing.
If they do not match, the printer may stop printing, displaying the message <41
CHK PAPER SZE>, or a paper jam may occur. Be sure to check if the paper size
specified in the printer driver matches the size of the paper loaded in the paper
cassette before using the printer. However, if SPECIAL MODE J (See p. 6-52) is
set to ON, the printer prints without checking the paper size even when the paper
size specified in the printer driver and the size of the paper loaded in the cassette
do not match.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size
paper of its long edges 215.9 mm or less when CASSETTE(n) SIZE (n = 1, 2) is set
to MIXED SIZES, load the paper in landscape orientation. When you are not
printing from UFR II Printer Driver, load the paper in portrait orientation.
NOTE
Select CUSTOM SIZE or CUSTOM SIZE R when you want to specify custom size
•
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press the
error before printing again.
You can specify the same setting in CASSETTE(n) SIZE (n = 1, 2) in the SELECT
•
FEEDER menu.
CASSETTE2 SIZE is displayed only when the optional paper feeder is installed.
•
A4*, LTR, LGL, EXEC, ENV. ISO-C5, ENV. COM10, ENV. MONARCH, ENV. DL,
ENV. ISO-B5, INDEX CARD, STMT, FLSC, 16K, A5, B5
Specifies a standard paper size for when the printer cannot determine the size of
the paper to process, such as when using paper that you cannot specify its size in
an application.
IMPORTANT
When printing from Windows or Macintosh, specify the paper size in the printer
driver. When you want to print from a computer in which an operating system such
as MS-DOS and UNIX is used and cannot specify the paper size, specify the size
in this item.
(Online) key to clear the