Adjusting The Color Balance; Settings Key - Canon LBP5360 User Manual

Adjusting the Color Balance

When all the printout results appear reddish or bluish, or the color balance is not
appropriate, you can correct the colors by adjusting each toner density of C (Cyan),
M (Magenta), Y (Yellow), K (Black). The toner density can be specified in the range
of 1 to 16 and is set to the standard density (8) before shipment.
When adjusting the toner density using the control panel, use the following
procedure.
IMPORTANT
While adjusting the toner density little by little, print the defective print data from the
computer and check the printout results. If you cannot adjust the toner density, reset the
density to the default value (8), and then contact your local authorized Canon dealer.
1
Press the
The
control panel.
2
Press the
SETUP
CONTROL MENU
3
Select QUALITY MENU using [
QUALITY MENU
GRADATION LEVEL→
The item for QUALITY MENU is displayed.
(Online) key.
(Online) indicator goes off, allowing you to specify the settings on the
(Settings) key.
→
→
] and [ ], then press [OK].

Adjusting the Color Balance

8
8-67