DENSITY: MAGENTA
1 to 16; 8*
Adjusts the print density of magenta for the print data. As the value increases, the
print density becomes denser.
NOTE
Normally, you do not need to adjust the print density with this item.
•
When this printer is connected to a network on which two or more printers are
•
being used at the same time, make a fine adjustment on the gap of the print density
among the printers.
DENSITY: YELLOW
1 to 16; 8*
Adjusts the print density of yellow for the print data. As the value increases, the
print density becomes denser.
NOTE
Normally, you do not need to adjust the print density with this item.
•
When this printer is connected to a network on which two or more printers are
•
being used at the same time, make a fine adjustment on the gap of the print density
among the printers.
DENSITY: BLACK
1 to 16; 8*
Adjusts the print density of black for the print data. As the value increases, the
print density becomes denser.
NOTE
Normally, you do not need to adjust the print density with this item.
•
When this printer is connected to a network on which two or more printers are
•
being used at the same time, make a fine adjustment on the gap of the print density
among the printers.
SETUP Menu Settings
6
6-37