Canon LBP5360 User Manual page 341

<55 HDD ERROR>
Cause
Remedy 1 The printer reformats the hard disk automatically.
Remedy 2 The printer starts up with its settings not using the hard disk by pressing the
Remedy 3 Contact your local authorized Canon dealer for servicing.
<56 HDD ERROR>
Cause
Remedy
<57 RIP ONCE ERR.>
Cause 1
Remedy 1 Divide the job into multiple jobs, then print again.
8
Remedy 2 Set RIP ONCE (See p. 6-21) in the CONTROL MENU options in the SETUP
Remedy 3 A copy of the data is printed by pressing the
Cause 2
Remedy 1 Print all the print jobs again using the printer driver for this printer.
Remedy 2 Reduce the number of the pages you print at a time and print again with the job
<58 JOB MEM.FULL>
Cause
Remedy 1 If you are processing multiple jobs at once, press the
Remedy 2 If the job data is too large, divide the job and print again.
8-42 Message List
An error has occurred in the hard disk.
(Online) key. However, you cannot print with the functions that require the hard
disk.
An error has occurred in the hard disk.
Format the hard disk in HDD MAINTENANCE (See p. 6-54) in the USER MAIN.
options in the SETUP menu. If the same error occurs, you need to replace the
hard disk. Contact your local authorized Canon dealer for servicing.
The printer cannot continue to print multiple copies using RIP Once because
the hard disk has run out of free space.
menu to OFF, and then perform a hard reset. (The functions of RIP Once
become disabled.)
The number of the copies that the printer can process exceeded when printing
in the [Edit and Preview] mode.
divided into multiple jobs.
There is not sufficient free RAM space to process jobs.
printing, wait for other jobs complete, and then print again.
<Auto Error Skip>
<Auto Error Skip>
(Online) key.
<Auto Error Skip>
(Online) key to cancel