Canon LBP5360 User Manual page 342

<59 JOB RX ERROR>
Cause The printer received any unanalyzable data while it is receiving a job, or it timed
out.
Remedy 1 Press the
Remedy 2 A problem may be occurring in the network you are using. Check the status of
the network that you are using.
<60 KEY MNG.ERR.1>
Cause The file related to key management is broken.
Select the SETUP menu ➞ the INTERFACE MENU options ➞ NETWORK
Remedy
MENU ➞ REMOTE UI SET. ➞ SSL, and then make sure that OFF is specified.
After that, restart the printer, and then regenerate the key and certificate and
specify the settings for SSL from the Remote UI. After setting the key
management and SSL, restart the printer again. (See Remote UI Guide
"Chapter 3 Appendix")
<60 DECODE ERROR>
Cause The printer could not analyze encrypted secured print data.
Remedy Perform a soft reset using the RESET menu, then print again.
<9E CHK "color" LOC>
Cause The toner cartridge of Y (Yellow), M (Magenta), C (Cyan), or K (Black) is not
installed in the appropriate position.
Remedy The toner cartridges of each color are installed in order of black, yellow, cyan,
and magenta from the top. Reinstall the toner cartridge of the indicated color in
the appropriate position. (See "Replacing Toner Cartridges," on p. 7-2)
<9G CHK "color" TNR>
Cause There is a possibility that a used toner cartridge whose life has once reached
the end of its life is installed.
Remedy 1 Check if there is any problem with the toner cartridge of the indicated color.
Remedy 2 If the message appears and there is a problem with the print quality even after
applying the Remedy 1, it is recommended that you remove the toner cartridge
of the indicated color and replace it with a new one. (See "Replacing Toner
Cartridges," on p. 7-2)
(Online) key to cancel printing, then print again.
<Auto Error Skip>
(Warning Message)
Message List 8-43
8