Recvry Printing; Special Mode J - Canon LBP5360 User Manual

RECVRY PRINTING

6

SPECIAL MODE J

6-52 SETUP Menu Settings
NOTE
You can check the adjusted printing position in PRNTPOSNPRINT (See p. 6-64) in
•
the UTILITY menu.
For adjusting the printing position, see "Adjusting the Printing Position," on p. 7-21.
•
Be aware that, when adjusting the printing position for 2-sided printing, the
•
orientation of the images on the reverse pages varies depending on the printing
orientation or setting for BIND.LOCATION (See p. 6-32).
ON*, OFF
Specifies whether to print the partially printed page when the printer stops printing
due to a paper jam or an error occurring.
If ON is specified for this item, the printer prints from the page in which a paper
jam or error occurred.
If OFF is specified for this item, the printer does not print from the partially printed
page but prints from the next page when a paper jam or error has occurred.
When the printer is performing 2-sided printing, it does not print the reverse page
of the partially printed page. The printing starts from the front side of the next
sheet.
OFF*, ON
Specifies whether the printer should stop printing, displaying the message <41
CHK PAPER SZE> or continue printing when TRAY PAPER SIZE, CASSETTE1
SIZE, or CASSETTE2 SIZE is set to MIXED SIZES.
If OFF is specified, the printer may stop printing, displaying <41 CHK PAPER
SZE>, when the paper size specified in the application is different from the size of
the paper loaded in the multi-purpose tray or paper cassette. The paper on which
the error occurred is output automatically. You can also continue printing by
pressing the (Online) key. However, the data may not be printed properly, or a
paper jam may occur.
If ON is specified, the printer prints without performing a print check even when
the paper size specified in the application is different from the size of the paper
loaded in the multi-purpose tray or paper cassette. However, the printing speed
may drop. Also, because the paper is printed at the paper size specified in the
application, blank areas may appear on the printed paper or part of the images
may be missing when the size of the paper loaded in the multi-purpose tray or
paper cassette is different from the paper size specified in the application.