IMPORTANT
Match the paper type specified in the SETUP menu of the printer and that specified in the
•
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting for TRAY PAPER TYPE is changed to that in the printer driver by
pressing the
(Online) key, allowing you to continue printing.
If the type of the paper practically loaded in the multi-purpose tray and the setting for
•
TRAY PAPER TYPE do not match, this may result in crucial damage to the engine. Be
sure to match the paper type.
If TRAY PAPER TYPE is set to MIXED TYPES, the printer does not check the type of the
•
loaded paper against the paper type specified in the printer driver. Be sure to check if the
paper type specified in the printer driver matches the type of the paper loaded in the
multi-purpose tray before using the printer.
1
Press the
SETUP
CONTROL MENU
2
Select FEEDER MENU using [
FEEDER MENU
TRAY PAPER SIZE→
3
Select TRAY PAPER TYPE using [
TRAY PAPER TYPE→
=PLAIN PAPER
4
Select the paper type using [
LABEL
=LABEL
"=" is displayed on the left of the paper type, and the paper type for the
multi-purpose tray is specified.
(Settings) key.
→
] and [ ], then press [OK].
→
→
] and [ ], then press [OK].
→
→
Printing from the Multi-purpose Tray
] and [ ], then press [OK].
4
4-51