Canon LBP5360 User Manual page 354

The data lies outside the paper.
Cause 1 You are using UFR II Printer Driver, and you loaded custom paper of its long
edges 215.9 mm or less in portrait orientation and printed when TRAY PAPER
SIZE or CASSETTE(n) SIZE (n = 1, 2) was set to MIXED SIZES.
Remedy Load the paper in landscape orientation, then print again.
Cause 2 When UFR II Printer Driver was not used, custom size paper was loaded in
landscape orientation to print.
Remedy Load the paper in portrait orientation, then print again.
Cause 3 Paper of the size smaller than the data size is loaded.
Remedy Load the paper of the size that matches the data size or print the data in the
reduced size that matches the paper size. (See Driver Guide)
Cause 4 The position of the paper is incorrect.
Remedy Load the paper properly and print again. (See "Printing from the Paper
Cassette," on p. 4-17, "Printing from the Multi-purpose Tray," on p. 4-35)
Cause 5 A document with no margins was printed.
Remedy 1 If you are using UFR II Printer Driver, secure a margin of 5 mm or more (10 mm
or more for envelopes) around the data, then print again (Data cannot be
printed within a 5 mm margin (10 mm for envelopes) on all sides of the paper).
(See the instruction manual supplied with your application)
Remedy 2 If you are using PCL Printer Driver, secure a margin of 4.23 mm or more (10
mm or more for envelopes) around the data, then print again (Data cannot be
printed within a 4.23 mm margin (10 mm for envelopes) on all sides of the
paper). (See the instruction manual supplied with your application)
IMPORTANT
You may not obtain the optimum print quality when printing data with no margin
using the PCL printer driver. It is recommended to secure a margin of 5 mm or
more around the data.
Remedy 3 If you select the [Print with Upper Left of Sheet as Starting Point] check box in
the [Finishing Details] dialog box in the UFR II printer driver, the printer prints
with its printable area expanded.
IMPORTANT
Depending on the print data to be printed, the edge of paper may be missing partly
during printing or may blot during color printing.
When You Cannot Obtain Appropriate Printout Results
8
8-55