Canon LBP5360 User Manual page 352

Cause 4 You are using UFR II Printer Driver, and you loaded custom paper of its long
edges 215.9 mm or less in portrait orientation and printed when TRAY PAPER
SIZE or CASSETTE(n) SIZE (n = 1, 2) was set to MIXED SIZES.
Remedy Load the paper in landscape orientation, then print again.
Cause 5 When UFR II Printer Driver was not used, custom size paper was loaded in
landscape orientation to print.
Remedy Load the paper in portrait orientation, then print again.
Cause 6 There is still jammed paper inside the printer.
Remedy Remove any jammed paper and print again. (See "Paper Jams," on p. 8-4)
The hard disk cannot be used.
Cause 1 HARD DISK in the CONTROL MENU options in the SETUP is set to OFF.
Remedy Set HARD DISK (See p. 6-19) to ON, and then perform a hard reset.
Cause 2 An error has occurred in the hard disk.
Remedy Format the hard disk in HDD MAINTENANCE (See p. 6-54) in the USER MAIN.
options in the SETUP menu. If the same error occurs, replace the hard disk.
Cause 3 The hard disk is not installed properly.
Remedy Turn the printer OFF, then check if the hard disk is installed properly. (See
"Installing a Hard Disk," on p. 9-22)
Cause 4 The data cannot be saved on the hard disk because there is not sufficient free
space in the hard disk.
Remedy Delete any unnecessary jobs from among the jobs saved on the hard disk.
Jobs cannot be saved.
Cause 1 The data cannot be saved on the hard disk because there is not sufficient free
space in the hard disk.
Remedy The printer is ready to print by pressing the
data. The data of 2GB or larger in total cannot be saved.
Cause 2 The number of the jobs exceeded the number of jobs you can save in the hard
disk.
Remedy 1 The printer is ready to print by pressing the
data. Up to 100 jobs can be saved all together.
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
When You Cannot Obtain Appropriate Printout Results
(Online) key, ignoring the print
(Online) key, ignoring the print
8
8-53