Canon LBP5360 User Manual page 335

Remedy 3 Specify the settings for STD PAPER SIZE and STD PAPER TYPE in the
Remedy 4 Press the
<18 NO CASSETTE 1>
Cause
Remedy
<1F OUTPUT FULL>
Cause
Remedy
<1G CHG."color" TNR>
Cause
Remedy
8
<1H CHK "color" CONN>
Cause
Remedy 1 Remove the toner cartridge of the indicated color, then install it properly.
Remedy 2 If the message appears and there is a problem with the print quality even after
<23 DOWN.MEM.FULL>
Cause
Remedy 1 The printer continues printing by pressing the
8-36 Message List
FEEDER MENU options in the SETUP menu to the size or type of paper that
can be loaded in the paper source.
(Online) key, then print from the currently selected paper source.
However, this may result in deterioration in print quality.
Cassette 1 is not set.
Set Cassette 1. (See "Printing from the Paper Cassette," on p. 4-17)
The output tray is filled to the limit.
Remove the paper in the output tray.
The toner cartridge of K (Black), Y (Yellow), M (Magenta), or C (Cyan) has
reached the end of its life.
Replace the toner cartridge of the indicated color with a new one. (See
"Replacing Toner Cartridges," on p. 7-2)
There is a possibility that the toner cartridge of Y (Yellow), M (Magenta), C
(Cyan), or K (Black) is not installed properly.
applying the Remedy 1, it is recommended that you remove the toner cartridge
and replace it with a new one. (See "Replacing Toner Cartridges," on p. 7-2)
The memory for registering macro and custom characters has run out and
overflowed.
overflowed data cannot be registered.
<Auto Error Skip>
(Online) key. However, the