Canon LBP5360 User Manual page 338

<37 CHK PPR TYPE>
Cause 1 An unavailable paper type is selected.
Remedy 1 The printer continues printing by pressing [Online]. However, printing is
continued with the paper type assumed to be plain paper. If the type of paper
loaded in the multi-purpose tray or paper cassette is not plain paper, you cannot
obtain appropriate printout results.
Remedy 2 Set the paper type to the appropriate one in TRAY PAPER TYPE (See p. 6-27)
or CASSETTE(n) TYPE (n = 1, 2) (See p. 6-29), then print again.
Cause 2 Color printing was performed on transparencies (Transparencies can be printed
only in black and white).
Remedy Set the color mode to "Black and White", then print in black and white.
<38 LOW IMGE QLTY>
Cause The printer cannot process the data because it is too complicated.
Remedy 1 The printer continues printing by pressing the
printer prints with the image quality level being lowered.
Remedy 2 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 6-35)
in the QUALITY MENU options in the SETUP menu to HIGH 1, and then print
again.
Remedy 3 If you want to print without the image quality level being lowered, install an
optional expansion RAM module, and then print again. (See "Installing RAM,"
on p. 9-15)
<39 SPL MEM.FULL>
Cause Because spool memory has run out, the printer cannot print.
Remedy 1 The printer continues printing by pressing the
page with which an error has occurred is not printed.
Remedy 2 Perform a soft reset in the RESET menu, specify the paper size smaller, and
then print again.
Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 6-35)
in the QUALITY MENU options in the SETUP menu to HIGH 1, and then print
again.
Remedy 4 If 2-SIDED PRINT. in the FEEDER MENU options in the SETUP menu is set to
ON, specify OFF, and then print again.
<Auto Error Skip>
<Auto Error Skip>
(Online) key. In this case, the
<Auto Error Skip>
(Online) key. However, the
Message List
8
8-39