Canon LBP5360 User Manual page 345

<FM SCALE ERROR>
Cause
Remedy
<HF HDD FULL>
Cause
Remedy 1 The printer is ready to print by pressing the
Remedy 2 Delete any unnecessary data from among the data saved on the hard disk.
<PC LOAD "size">
Cause
Remedy 1 Load the paper of the size selected in the application (or the one specified by
Remedy 2 If you are using the multi-purpose tray, check the size of the paper in the
8
Remedy 3 Press the
Remedy 4 Press the
IMPORTANT
If you open the front cover or top cover when the message <PC LOAD "size"> is
displayed, the message may disappear. However, be sure to follow the directions in the
displayed message to change the paper.
8-46 Message List
There is a character in which the number of coordinate points on the contour
lines exceeds the limitation of a pseudo-scalable font.
The printer continues printing by pressing the
characters with which an error has occurred are not printed properly.
Free space in the hard disk has run out.
current process.
The paper of the size specified in the application is not loaded in the paper
cassette or multi-purpose tray, or the paper source for the different paper size is
selected.
scaling factors). (See "Printing from the Paper Cassette," on p. 4-17)
multi-purpose tray, and when the size does not match the size specified in the
application (or the one specified by scaling factors), specify the setting properly.
(See "Printing from the Multi-purpose Tray," on p. 4-35)
(Feeder Selection) key, then select the paper cassette in which the
paper of the matched size is loaded. (See "Selecting a Paper Source," on p.
4-13)
(Online) key, then print to the currently loaded paper forcibly. If
you are using the multi-purpose tray, the paper size setting for the multi-purpose
tray automatically changes to the setting specified in the application.
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key, ignoring the