In this case, adjust the printing position by -5.0 mm upward.
IMPORTANT
OFFSET Y (DUP.) and OFFSET X (DUP.) allow you to specify the printing position of the
first page of 2-sided printing. The second page of 2-sided printing follows the settings for
each paper source.
7
NOTE
The printing position can be adjusted within a range from +5.0 to -5.0 mm in the vertical
direction (Y) and from +2.22 to -2.22 mm in the horizontal direction (X).
1
2
3
7-24
Adjusting the Printing Position
Top
Feeding
direction
Press the
(Online) key.
The
(Online) indicator goes off, allowing you to specify the settings on the
control panel.
Press the
(Settings) key.
SETUP
CONTROL MENU
→
Select USER MAIN. using [
USER MAIN.
ADJ.START POS. →
The item for USER MAIN. is displayed.
] and [ ], then press [OK].
→