Turning The Printer Off - Canon LBP5360 User Manual

3
4
2

Turning the Printer OFF

Turn the printer OFF using the following procedure. The procedure for turning the
printer OFF is different between when a hard disk is used and when it is not used.
IMPORTANT
• When using the hard disk, be sure to turn the printer OFF as the procedure for the
protection of the hard disk. (See p. 2-43)
• If the printer is connected to a network, make sure that other computers are not sending
print data to the printer before turning the printer OFF.
• If you turn the printer OFF when the
in the printer memory will be erased. If there is any necessary print data remaining in the
printer, wait until it is output, or press the
select FORM FEED to output the data before turning the printer OFF.
• Do not turn the power OFF when the printer is in any of the following status:
- During printing
- While the printer is running a self-diagnostic test immediately after turning the power
- While a message informing you that the NVRAM is being initialized or being written is
- While <02 WARMING UP> or <02 CALIBRATING> is displayed
• When you are using a hard disk, make sure that the
turn the printer OFF while the
hard disk or being written to the hard disk), the hard disk may be damaged and disabled.
2-42 Turning the Printer ON and Checking the Printer Operation
Select PANEL LANGUAGE using [
[OK].
PANEL LANGUAGE →
=ENGLISH
Select the display language using [
[OK].
FRENCH
=FRENCH
The display language is changed.
PANNEAU LANGUES→
ON
displayed
] and [ ], then press
→
→
→
(Job) indicator is on, all the print data remaining
(Reset) key in the offline state and then
(HDD) indicator is on (while data is being read from the
] and [ ], then press
(HDD) indicator is not on. If you