Canon LBP5360 User Manual page 344

<D8 VERSION ERROR>
Cause You tried to print from a printer driver that is not for LBP5360.
Remedy Print from the printer driver for LBP5360.
<D8 SYNTAX ERROR>
Cause Invalid data is sent when printing using UFR II Printer Driver.
Remedy 1 Press the
page with which an error has occurred and its subsequent pages are not
printed.
Remedy 2 Confirm the data to be printed, then print again.
<D8 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<E7 CHK FIX.UNIT>
Cause The fixing unit is not installed or installed improperly.
Remedy Install the fixing unit properly. (See "Replacing Toner Cartridges," on p. 7-2)
<F9-nn PWR OFF>ON> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred while the printer is processing print data.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<FM SIZE ERROR>
Cause There is some font with its size exceeds the pseudo-scalable font size.
Remedy The printer continues printing by pressing the
characters with which an error has occurred are not printed properly.
(Online) key to continue printing from the next data. However, the
(Warning Message)
<Auto Error Skip>
(Online) key. However, the
Message List
8
8-45