Canon LBP5360 User Manual page 146

5
Before loading transparencies, labels, or coated paper, fan
them in small batches and align the edges.
Thoroughly fan in small batches
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
Be sure to fan the transparencies, labels, or coated paper thoroughly before
•
loading them. If they are not fanned enough, multiple sheets of paper may be fed at
once, causing paper jams.
When fanning or aligning the transparencies or coated paper, try to hold the edges
•
to avoid touching the printing surface.
Take care not to mark or stain the printing surface of the transparencies or coated
•
paper with fingerprints, dust, or oil. This may result in poor print quality.
6
Gently load the stack of paper with the printing side facing
down until it touches the back of the tray.
Be sure that the paper stack is loaded under the load limit guides (A).
Tap the edges on a flat
surface a few times
(A)
Printing from the Multi-purpose Tray
4
4-39