Canon LBP5360 User Manual page 359

A portion of a page is not printed.
Cause 1
Remedy 1 Clear the [Manual Scaling] check box in the printer driver. If the check box is
Remedy 2 Select the [Manual Scaling] check box in the printer driver, then specify an
Cause 2
Remedy
Cause 3
Remedy 1 If you are using UFR II Printer Driver, data cannot be printed within a 5 mm
8
Remedy 2 If you select the [Print with Upper Left of Sheet as Starting Point] check box in
Toner does not fix well.
Cause 1
Remedy
8-60 When You Cannot Obtain Appropriate Printout Results
The scale factor is incorrect.
cleared, the scale factor will be set according to [Page Size] and [Output Size]
automatically.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
appropriate scale factor according to the paper size to be used.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
The position of the paper is incorrect.
Load the paper properly. (See "Loading Paper in the Paper Cassette," on p.
4-19, "Loading Paper in the Multi-purpose Tray," on p. 4-36)
A document with no margins was printed.
margin (10 mm for envelopes) on all sides of the paper. If you are using PCL
Printer Driver, data cannot be printed within a 4.23 mm margin (10 mm for
envelopes) on all sides of the paper. Secure a margin around the data.
IMPORTANT
You may not obtain the optimum print quality when printing data with no margin
using the PCL printer driver. It is recommended to secure a margin of 5 mm or
more around the data.
the [Finishing Details] dialog box in UFR II Printer Driver, the printer prints with
its printable area expanded.
IMPORTANT
Depending on the print data to be printed, the edge of paper may be missing partly
during printing or may blot during color printing.
Appropriate paper is not being used.
Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 4-2)