Canon LBP5360 User Manual page 363

Data is not printed in the correct color (specified color) even after specifying the same color
for a filled-in pattern and its border.
Cause
Remedy
When printing from Windows, streaks appear on the printed paper, diagrams are printed with
their colors partially different from the data, or diagrams that are not filled in with any color do
not appear through another data over them and cannot be printed in correct color.
Cause
Remedy
Colored text appears to be blurred.
Cause
8
Remedy 1 Print again with thinner fonts.
Remedy 2 Set [Matching Method] to [Perceptual [Monitor Color Matched]] in the printer
The printing position is skewed slightly depending on the color to be printed.
Cause
Remedy 1 Adjust the phenomenon of "Out-of-Register Colors" in CALIBRATION (See p.
8-64 When You Cannot Obtain Appropriate Printout Results
A special process may be applied depending on the line width of the border so
that thin lines are printed clearly.
Adjust [Gamma] in the printer driver.
In order to specify the setting for [Gamma], display the [Matching] sheet by
selecting the [Manual Color Settings] check box in the [Quality] sheet, and then
clicking [Color Settings].
The superimposed areas are misaligned because the document is printed with
its size enlarged or reduced, or any complicated superimpose process is
specified in the application.
Specify the following settings in the UFR II printer driver.
Click [Details] in the [Quality] sheet, then set [Rendering Rate] to [24 BPP].
A bold font is being used for the colored text.
driver.
In order to specify the setting for [Matching Method], display the [Matching]
sheet by selecting the [Manual Color Settings] check box in the [Quality] sheet,
and then clicking [Color Settings].
Although laser printers are manufactured with technology of high precision, a
phenomenon of "Out-of-Register Colors" may be slightly conspicuous
depending on the print image. Please note that this is due to the structure of
laser printers, but not due to printer malfunction.
6-63) in the UTILITY menu.