IMPORTANT
When you change the paper loaded in the multi-purpose tray frequently, it is
•
convenient if TRAY PAPER SIZE in the control panel is set to MIXED SIZES. If
TRAY PAPER SIZE is set to MIXED SIZES, you do not need to specify the setting
for TRAY PAPER SIZE each time you load the different size paper. However, when
specifying MIXED SIZES, make sure that the size of the paper loaded in the
multi-purpose tray matches the paper size specified in the printer driver before
printing. If they do not match, the printer may stop printing, displaying the message
<41 CHK PAPER SZE>, or a paper jam may occur. Be sure to check if the paper
size specified in the printer driver matches the size of the paper loaded in the
multi-purpose tray before using the printer. However, if SPECIAL MODE J (See p.
6-52) is set to ON, the printer prints without checking the paper size even when the
paper size specified in the printer driver and the size of the paper loaded in the
multi-purpose tray do not match.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size
paper of its long edges 215.9 mm or less when TRAY PAPER SIZE is set to MIXED
SIZES, load the paper in landscape orientation. When you are not printing from
UFR II Printer Driver, load the paper in portrait orientation.
NOTE
Select CUSTOM SIZE or CUSTOM SIZE R when you want to specify custom size
•
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press the
error before printing again.
You cannot print on any area within 10 mm of the edges of an envelope. (If you
•
have selected the [Print with Upper Left of Sheet as Starting Point] check box in
[Finishing Details] in the UFR II printer driver, you can extend the printable area to
near the edges of the paper. Depending on the print data to be printed, however,
the edge of paper may be missing partly during printing or may blot during color
printing. For more details, see Help of the UFR II printer driver.)
You can specify the same setting in TRAY PAPER SIZE in the SELECT FEEDER
•
menu.
CASSETTE(n) SIZE (n = 1, 2)
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZE R, FLSC,
16K, A5, B5
Specifies the size of the paper loaded in the paper cassettes (Cassette 1 and 2).
(Online) key to clear the
SETUP Menu Settings
6
6-23