1
9
2
9-16
Installing RAM
Perform the following procedure.
Turn the printer OFF a.
If a USB cable is connected, turn the computer off b, and then disconnect the
USB cable c.
Disconnect the power plug from the AC power outlet d.
If you are using a hard disk, turn the printer OFF after performing a shutdown
using the RESET menu.
If you are not using a hard disk, make sure that the
that the printer is not printing by checking the display.
b
Remove all the interface cables and the power cord from the
printer.
If there is not sufficient space to install the RAM module, move the printer to a
place where you can work easier.
(Job) indicator is off and
a
c
d