Transmission With F-Code (F-Code Tx) - Konica Minolta bizhub 225i User Manual

4
4 Convenient Transmission and Receiving Functions
4.1

Transmission with F-Code (F-Code TX)

This machine supports F-code communication defined by the Communications and Information network As-
sociation of Japan (CIAJ).
The F code is a mail box function that uses SUB (SUB address), SEP (selective polling), [SID], and [PWD]
(password) that are defined in the G3 standard of the International Telecommunication Union (ITU-T).
Specify the following F code using the Keypad to suit your environment.
F-Code
SUB
PASSWORD (SID)
POLL ID (SEP)
Tips
-
The F-code function is available only in fax machines that supports the F-code function. Before config-
uring settings, check that both the machines support the F-code function.
-
If an F code (SUB or SID) is registered in the one-touch dial or speed dial in advance, you can establish
an F-code communication.
-
A confidential communication is available between machines compatible with an F code.
4-3
Transmission with F-Code (F-Code TX)
Contents
Specify this option when sending a fax using an F code. This code can be
specified using up to 20 digits.
Specify this option when restricting recipients with a password. This code
can be specified using up to 20 digits.
Specify this option when the recipient makes a call to ask the sender to
send the original prepared in the sender side to the recipient.
4.1
bizhub 225i