Setting The Hdmi Out Setup; Setting The Audio Delay; Setting The On Screen Display (Osd) - Denon AVC-A11XV Operating Instructions Manual

Advanced Setup – Part 1

Setting the HDMI Out Setup

• Set whether to use the analog video signals to HDMI
conversion function.
• When using this conversion function, set the color
format and video range of the signals output from
the HDMI terminal.
1
CURSOR D D H H
Press the or button to
select the "HDMI Out Setup" at the
"Video Setup" menu, then press the
ENTER
button.
• Display the "HDMI Out Setup" screen.
2 CURSOR D D H H
Press the or button to
select the setting, then press the
CURSOR F F G G
or button to select the
parameter.
Analog to HDMI Convert:
• ON:
Setting for converting analog video signals into
HDMI signals.
• OFF:
Setting for not converting analog video signals into
HDMI signals.
Color Space:
• Y Cb Cr:
The Y Cb Cr format video signals is output via the
HDMI output connector.
• RGB:
The RGB format video signals is output via the
HDMI output connector.
RGB Mode Setup:
• Normal:
Signals are output via the HDMI output connector
with a digital RGB video range (data range) of 16
(black) to 235 (white).
• Enhanced:
Signals are output via the HDMI output connector
with a digital RGB video range (data range) of 0
(black) to 255 (white).
When the HDMI and the DVI-D connectors are
connected, the black may seem to stand out,
depending on the TV or the monitor. In this case,
set this to "Enhanced".
When "Y Cb Cr" is selected under "Color
Space", "RGB Mode Setup" will have no effect.
3
ENTER
Press the button to enter the
setting.
• The "Video Setup" menu reappears.
• "Color Space" and "RGB Mode Setup" are only
displayed when "Analog to HDMI Convert" is set to
"ON".
• When connecting to an HDCP compatible monitor
equipped with DVI-D terminal using an HDMI/DVI-D
converter cable, the signals are output in RGB
format, regardless of the "Color Space" setting.
• To view the on screen display using an HDMI
monitor, set "Analog to HDMI Convert" at "HDMI
Out Setup" to "ON" (default).

Setting the Audio Delay

• When watching a DVD or other video source, the
picture on the monitor may seem delayed with
respect to the sound. In this case, adjust the audio
delay to delay the sound and synchronize it with the
picture.
• The audio delay setting is stored separately for each
input source.
1
CURSOR D D H H
Press the or button to
select the "Audio Delay" at the "Video
ENTER
Setup" menu, then press the
button.
• Display the "Audio Delay" screen.
2
CURSOR F F G G
Press the or button to set
the delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that
the movement of the actors' lips is synchronized
with the sound.
3
ENTER
Press the button to enter the
setting.
• The "Video Setup" menu reappears.
• The audio delay setting does not apply when playing
in the EXT. IN mode or in the analog input direct
mode or stereo mode (only when the crossover
frequency is set to "FIXED–THX–" (TONE DEFEAT
"ON", Room EQ "OFF").
• By default, this menu is not displayed when no
digital signals are being input.

Setting the On Screen Display (OSD)

• Use this to turn the on screen display (messages
other than the menu screens) on or off.
• Sets the on screen display's display mode.
1 CURSOR D D H H
Use the or
select the "On Screen Display" at the
"Video Setup" menu, then press the
ENTER
button.
• Display the "On Screen Display" screen.
46
ENGLISH
Advanced Setup – Part 1
2 CURSOR D D
Press the
select the item to be set, then press the
CURSOR F F G G
or button to select the
parameter.
Function/Mode Status:
Set whether or not to turn on the on screen display
of the input source name and input mode when an
input source is selected.
Master Volume Status:
Set whether or not to turn on the on screen display
of the main volume level when the main volume is
operated.
Display Mode:
• Mode 1:
Prevents flickering of the on screen display when
there is no video signal.
• Mode 2:
Flickering is not prevented.
Use this mode if the on screen display does not
appear in the Mode 1, as may happen according to
the TV being used.
3
ENTER
Press the button to enter the
setting.
• The "Video Setup" menu reappears.
4
CURSOR D D
Press the
select the "Exit", then press the
button to
button.
• The "System Setup Menu" reappears.
ENGLISH
H H
or button to
H H
or button to
ENTER