Basic Operation; Playback; Operating The Remote Control Unit; Playing The Input Source - Denon AVC-A11XV Operating Instructions Manual

Basic Operation

Playback

Operating the remote control unit

The RC-995 remote control has a backlit LCD screen
whose contents change according to the mode or
function selected, with the appropriate remote
commands for that mode or function.
2 Operate the this unit
AMP
The button is the main mode for
controlling the AVC-A11XV in the main
room (MAIN ZONE).
The function switches as shown below each time
one of the MODE SELECTOR buttons is pressed.
AMP/Z2 : AMP, ZONE2
Z3/Z4 : ZONE3, ZONE4*
(* : This mode can not be used with the AVC-
A11XV.)
2 SOURCE MENU
To operate the system's source components.
SOURCE
Press the button to
display the screen shown below,
to that you can select an input
source.
2 SURROUND MENU
To select specific surround modes.
SURROUND
Press the button
to display the screen below to
choose a specific surround
mode.
2 NUMBER / SYSTEM CALL MENU
Operate the "Number / System call" menu function.
NUMBER / SYSTEM
Press the
CALL
button to display the
screen below.
• This function provides the ability to program a series
of individual remote control codes into a macro
stored under one of the number pad's numeric
choices ( page 32 ~ 35).
FUNCTION VOLUME
SOURCE HOME THX ROOM EQ
CINEMA

Playing the input source

1
Select the input source to be played.
Example: CD
(Main unit) (Remote control unit)
To select the input source when ZONE2 SELECT
or ZONE3/REC SELECT is selected, press the
SOURCE button on the main unit then operate the
input function selector.
2
Start playback on the
component.
For operating instructions, refer
component's manual.
3
Adjust the volume.
(Main unit) (Remote control unit)
M.VOL. -80.0dB
The volume level is displayed on the master
volume level display.
20
ENGLISH
SOURCE
FUNCTION
VOLUME
ROOM EQ
The volume can be adjusted within the range of
–80 to +18 dB, in steps of 0.5 dB. However,
when the channel level is set (
54, 55), if the volume for any channel is set at
+0.5 dB or greater, the volume cannot be
adjusted up to 18 dB. (In this case the maximum
volume adjustment range is "18 dB —
(Maximum value of channel level)".)
2 To choose the surround sound mode
Example: THX Surround EX
SURROUND
Press the button, then press the
HOME THX CINEMA
button.
selected
For more information about the surround modes
to the
( page 24, 25).
2 To select the Room EQ function
ROOM EQ
Press the button.
For more information about the Room EQ
function ( page 22).
ENGLISH
Basic Operation
SURROUND
HOME THX
CINEMA
page 31 or