Setting The Manual Eq Setup; Procedure For Copying The "Flat" Correction Curve - Denon AVC-A11XV Operating Instructions Manual

Advanced Setup – Part 1
• The various settings applied in the auto surround
mode can be checked via the on screen display.
Simply press the ON SCREEN button.

Setting the Manual EQ Setup

Allows you to adjust the tonal quality of the various
speakers (except the subwoofer) while listening to a
music source.
1
CURSOR D D H H
Press the or button to
select the "Manual EQ Setup" at the
"Advanced Playback" menu, then press
ENTER
the button.
• Display the "Manual EQ" screen.
2
CURSOR F F G G
Press the or button to
select the adjustment mode, then press
ENTER
the button.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers
can be adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3
CURSOR F F G G
Press the or button to
select the speaker to be set.
Example:
When "L/R CH" is selected.
The display changes as follows.
q Select "L/R CH"
FL/FR C SLA/SRA
SBL/SBR SL/SR A+B SLB/SRB
w Select "Each CH"
FL FR C SLA SRA SLB
SBR SBL SR A+B SL A+B SRB
SB
1spkr
When the surround back speaker setting is
set to "1spkr" at "Speaker Configuration",
this is set to "SB".
e Select "All CH"
In this case, speaker selection is not
performed.
If a value is already set for the FL channel, the
data stored for the FL channel is displayed.
4
CURSOR D D H H
Press the or button to
select the frequency, then press the
CURSOR F F G G
or button to adjust the
gain level.
Each frequency can be adjusted the range from
–20 dB to +6 dB in 0.5 dB step.
5
ENTER
Press the button to enter the
setting.
• The "Manual EQ" screen reappears.
6
CURSOR D D H H
Press the or
select the "Exit", then press the
button.
• The "Advanced Playback" menu reappears.
7
CURSOR D D H H
Press the or
select the "Exit", then press the
button.
• The "System Setup Menu" reappears.
• "Base Curve Copy" is displayed after performing the
Auto Setup.
• To restore the settings to their defaults, select
"Default Yes 0", then press the CURSOR F F button.
48
ENGLISH
Advanced Setup – Part 1
Procedure for copying the "Flat"
correction curve
1 CURSOR D D
Press the
button to the "Base Curve Copy", then press the
CURSOR F F
ENTER
button.
2
CURSOR F F
Press the
the "Yes".
button to
ENTER
3
ENTER
Press the button to enter the
setting.
• The "Manual EQ" screen reappears.
The type of the copied correction curve is
displayed in the upper right of this screen.
• If the "Auto Setup" procedure has not been
performed, this item is not displayed.
ENGLISH
button to select
button to select