Tone Control Setting; Adjusting The Tone; Tone Defeat Mode; Channel Level - Denon AVC-A11XV Operating Instructions Manual

ENGLISH
Basic Operation
SURROUND
ENTER PARAMETER
CURSOR TONE DEFEAT

Tone control setting

• Use the tone control setting to adjust the bass and
treble as desired.
• The tone control function will not work in the PURE
DIRECT, DIRECT or Home THX Cinema mode.

2 Adjusting the tone

1
SURROUND PARAMETER
Press the
button.
• Display the surround parameter menu.
The screen selected surround mode appears.
2
CURSOR D D H H
Press the or
select the "TONE".
ENTER
3
CURSOR F F
Press the
• Switch to the "Tone Control" screen.
4
CURSOR G G
Press the
the "Tone Defeat OFF".
5
button to CURSOR D D
Press the
select the "Bass" or "Treble".
6
CURSOR F F
Press the
the level.
To increase the bass or treble:
The bass or treble sound can be increased to up
to +6 dB in steps of 1 dB.
To decrease the bass or treble:
CURSOR
The bass or treble sound can be decreased up to
–6 dB in steps of 1 dB.
SURROUND
PARAMETER
7
ENTER
Press the
• The surround parameter menu screen
reappears.
button.
8
Press the
PARAMETER
setting.

2 Tone defeat mode

If you do not want the bass and treble to be adjusted,
turn on the tone defeat mode.
button to select
TONE DEFEAT
Press the
the "Tone Defeat" mode.
The signals do not pass through the bass and
treble adjustment circuits, providing higher
quality sound.
H H
or button to
31
ENGLISH

Channel level

G G
or button to set
You can adjust the channel level either according to
the playback sources or to suit your tastes, as
described below.
1
Press the
• Display the "Channel Vol." screen.
button.
ENTER SURROUND
or
button to complete the
Channels which is not used are not displayed.
2
Press the
button to select the speaker.
The channel switches as shown below each time
the ENTER button is pressed.
button to turn on
3
Press the
adjust the level.
The adjustment range for the different channels
is +12 dB to –12 dB in step of 0.5 dB.
The sound from the subwoofer can be
completely cut by lowering the SW (subwoofer)
setting one additional from –12 dB (setting it to
"OFF").
• When the surround back speaker setting is set to
"1spkr" for "Speaker Configuration" (
this is set to "SB".
Basic Operation
ENTER
button.
CURSOR D D H H ENTER
, or
FL C FR SW SR
FADER SL SBR
SBL
CURSOR F F G G
or button to
page 53),