Advanced Playback; Setting The 2Ch Direct / Stereo; Setting The Dolby Digital Setup; Setting The Auto Surround Mode - Denon AVC-A11XV Operating Instructions Manual

ENGLISH
Advanced Setup – Part 1

Advanced Playback

Makes more detailed audio playback settings.

Setting the 2ch Direct / Stereo

Set this when you want to change the speaker
settings when the surround mode is set to the 2-
channel Direct or Stereo mode.
1 CURSOR D D H H
Press the or
select the "Advanced Playback" at the
"System Setup Menu", then press the
ENTER
button.
• Display the "Advanced Playback" menu
screen.
2
CURSOR D D H H
Press the or
select the "2ch Direct / Stereo" at the
"Advanced Playback" menu, then press
ENTER
the button.
• Display the "2ch Direct / Stereo" screen.
Example:
This screen is displayed in function of the
settings made at "Speaker Configuration",
"Subwoofer Setup", "Delay Time" and
"Crossover Frequency"
3
CURSOR F F
Press the
select the "Custom".
button to
4
CURSOR D D
Press the
select the setting, then press the
CURSOR F F G G
or button to select the
parameter.
5
ENTER
Press the button to enter the
setting.
• The "Advanced Playback" menu reappears.
button to
2 Setting the front B speakers when
the surround mode is set to the 2-
channel Direct or Stereo
When "Front B" is selected at "Power Amp Assign"
and "Custom" is selected at this setting, the "Front
B" setting is displayed.
To play signals from the Front B speaker when in
the 2-channel Direct or Stereo mode, set "Used".

Setting the Dolby Digital Setup

Sets the down-mixing method when not using a
center speaker or surround speakers.
G G
or button to 1 CURSOR D D
Press the
select the "Dolby Digital Setup" at the
"Advanced Playback" menu, then press
ENTER
the button.
• Display the "Dolby Digital Setup" screen.
H H
or button to
2
CURSOR F F
Press the
select the "ON" if you want to use the
Compression, "OFF" if you do not want
to use it.
ON:
The dynamic range is compressed automatically
according to the combination of speakers being
used.
OFF:
The dynamic range is not compressed.
Set "Compression" to "ON" if it seems that
sound is distorted because the input level
exceeds the allowable input for the front
speakers.
When a center speaker or surround speakers are
not connected, the sounds in those channels are
directed to the front speakers.
3
ENTER
Press the
setting.
• The "Advanced Playback" menu reappears.
47
ENGLISH

Setting the Auto Surround Mode

The surround mode used at last for the four types of
input signals shown below is stored in the memory,
and the signal is automatically played with that
H H
or button to surround mode the next time it is input.
Note that the surround mode setting is also stored
separately for the different input sources.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other
multi-channel format (DOLBY PL
e Multi-channel signals of Dolby Digital, DTS or
other multi-channel
SURROUND)
r PCM and DSD multi-channel signals other than
Dolby Digital and DTS (MULTI CH IN)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the
surround mode does not change even if the input
signal is changed.
G G
or button to
1
CURSOR D D
Press the
select the "Auto Surround Mode" at the
"Advanced Playback" menu, then press
ENTER
the
• Display the "Auto Surround Mode" screen.
2
CURSOR F F
Press the
select the "ON" if you want to use the
auto surround mode, "OFF" if you do
not want to use it.
button to enter the
3
Press the
setting.
• The "Advanced Playback" menu reappears.
Advanced Setup – Part 1
II
x cinema)
format (DOLBY/DTS
H H
or button to
button.
G G
or button to
ENTER
button to enter the