Multi-Zone Playback Using The Speaker Terminals; Outputting A Program Source To An Amplifier, Etc., In A Zone2 Room (Zone2 Select Mode); Outputting A Program Source To An Amplifier, Etc., In A Zone3 Room (Zone3 Select Mode) - Denon AVC-A11XV Operating Instructions Manual

Advanced Operation

Multi-zone playback using the SPEAKER terminals

2 When using the power amplifier as the ZONE2/ZONE3 output
When the power amplifier is assigned to the ZONE2 or ZONE3 output channel at "Power Amp Assign" in the
"System Setup Menu", the MAIN ZONE speaker terminals can be used as the ZONE2 or ZONE3 speaker out
terminals ( page 49, 50).
[System configuration
and connections example]
Using external amplifier as the ZONE2 and using this
AVC-A11XV internal amplifier as the ZONE3.
MAIN ZONE 5.1-channel systems
Monitor
FL FR
C
SW
AVC-A11XV
DVD player
B
Input
SL SR
SYSTEM REMOTE
CONTROL UNIT RC-995
ZONE2 MULTI ZONE
AUDIO OUT (VARIABLE OUT) SPEAKER OUT
ZONE3
ZONE2 VIDEO OUT
VIDEO OUT
Monitor Monitor
B
Power Amplifier
ZONE 2 ZONE 3
[System configuration
and connections example]
Using this AVC-A11XV internal amplifier as the ZONE2
and using external amplifier as the ZONE3.
MAIN ZONE 5.1-channel systems
Monitor
FL FR
C
SW
AVC-A11XV
DVD player
B
Input
SL SR
SYSTEM REMOTE
CONTROL UNIT RC-995
MULTI ZONE ZONE3
SPEAKER OUT AUDIO OUT (VARIABLE OUT)
ZONE3
ZONE2 VIDEO OUT VIDEO OUT
Monitor Monitor
B
Power Amplifier
ZONE 2 ZONE 3
: MULTI SOURCE VIDEO signal cable
: MULTI SOURCE AUDIO signal cable
: SPEAKER cable
Refer to CONNECTIONS ( page 19).
FUNCTION ZONE3/REC SELECT
ZONE2 SELECT
Outputting a program source to an
amplifier, etc., in a ZONE2 room
(ZONE2 SELECT mode)
1
ZONE2 SELECT
Press the
display the "ZONE2 SOURCE" on the
display.
2
FUNCTION
Turn the knob to select the
source you want to output appears on
the display.
3
Start playing the source to be output.
For operating instructions, refer to the manuals
of the respective components.
38
ENGLISH
Advanced Operation
Outputting a program source to an
amplifier, etc., in a ZONE3 room
(ZONE3 SELECT mode)
1
ZONE3/REC SELECT
Press the
display the "ZONE3 SOURCE" on the
display.
• The MULTI indicator light.
The display switches as follows each time the
button is pressed.
ZONE3 RECOUT
2
FUNCTION
Turn the
source you want to output appears on
the display.
3
Start playing the source to be output.
button to
For operating instructions, refer to the manuals
of the respective components.
• The signals of the source selected in the ZONE3
mode are also output from the VCR-1, VCR-2, VCR-3
and CDR/TAPE recording output terminals.
• Digital signals are not output from the ZONE2 and
ZONE3 audio output terminals.
• About the MULTI ZONE connections (
38).
• Digital outputs of the OPTICAL2, 3 and 4 OUT
normally switch in association with the ZONE3/REC
SELECT mode, but if "ZONE2 SELECT" is selected
at "Digital Out Assign", the source switches in
association with the "ZONE2 SELECT" mode for the
OPTICAL2 OUT digital output connector (
52).
ENGLISH
button to
knob to select the
page 37,
page