Setting The Digital Out Assignment; User Memory; Setup Lock - Denon AVC-A11XV Operating Instructions Manual

Advanced Setup – Part 1

Setting the Digital Out Assignment

The optical digital output connectors on the AVC-
A11XV's rear panel (OPTICAL2 to 4 OUT) normally
function in association with the ZONE3/REC SELECT
mode. With this setting, the OPTICAL 2 OUT
connector can be used in association with the ZONE2
SELECT mode.
1 CURSOR D D H H
Press the or button to
select the "Digital Out Assign" at the
"Option Setup" menu, then press the
ENTER
button.
• Display the "Digital Out Assign" screen.
2
CURSOR F F G G
Press the or button to
select whether to associate
OPTICAL2 OUT connector to the
"ZONE3/REC SELECT" or "ZONE2
SELECT" mode.
3
ENTER
Press the button to enter the
setting.
• The "Option Setup" menu reappears.

User Memory

The currently set settings (system setup, surround
parameters, etc.) can be stored in the memory. The
stored settings can be called out when needed.
1
CURSOR D D H H
Press the or
select the "Setup Memory / Lock" at the
"Option Setup" menu, then press the
ENTER
button.
• Display the "Setup Memory / Lock" screen.
2
CURSOR D D H H
Press the or
select the "User Memory", then press
ENTER
the button.
• Switch to the "User Memory" screen.
the
3
CURSOR F F
Press the button to select
the "Yes".
• About 30 seconds are required for the
settings to be stored in the memory.
Once the settings are stored in the memory,
"Load" is displayed and the settings can be
loaded.
4
CURSOR D D H H
Press the or
select the "Exit", then press the
button.
• Return to the "Setup Memory / Lock"
screen.

Setup Lock

The system setup settings can be locked so that they
cannot be changed easily.
1
CURSOR D D
Press the
button to
select the "Setup Lock" at the "Setup
Memory / Lock" screen, then press the
ENTER
button.
• Switch to the "Setup Lock" screen.
2 CURSOR F F
Press the
button to
"ON", to lock the system setup settings,
ENTER
then press the
• Return to the "Setup Memory / Lock"
screen.
3
CURSOR D D
Press the
select the "Exit", then press the
button.
• The "Option Setup" menu reappears.
4
CURSOR D D
Press the
select the "Exit", then press the
button.
• Finalize the setting and exit the "Option
Setup" menu.
button to
ENTER
52
ENGLISH
• When the setup lock function is activated, the
settings listed below cannot be changed, and "Setup
Locked" is displayed when related buttons are
operated.
H H
or button to
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
• RoomEQ
• To unlock, press the SETUP button again and display
the "Setup Lock" screen, then select "OFF" and
press the ENTER button.
button to select
button.
H H
or button to
ENTER
H H
or button to
ENTER
ENGLISH
Advanced Setup – Part 1