Zone2 / Zone3 Speaker Out Connections; Connecting The Pre-Out Terminals; Connecting The Power Supply Cord - Denon AVC-A11XV Operating Instructions Manual

ENGLISH
Connecting Other Sources

ZONE2 / ZONE3 speaker out connections

• When the power amplifier is assigned to the ZONE2 or ZONE3 output channel at "Power Amp Assign" in the
"System Setup Menu", the MAIN ZONE speaker terminals can be used as the ZONE2 or ZONE3 speaker out
terminals ( page 49, 50).
• The connections diagram below is an example for when the surround back speaker is assigned to the ZONE2
stereo 2 channel.
In this case, Surround Back Speaker OUT can not be used for MAIN ZONE.
Front Center
right speaker speaker
( R )
> <
>
Surround
right speaker
(A)
( R )
> <
( R )
> <
Surround ZONE2 Front
right speaker (B) right speaker
Front
Subwoofer
left speaker
( L )
<
Connection terminal
<
IN
for subwoofer with
built-in amplifier
(subwoofer), etc.
ZONE2
( R ) ( L ) ( L )
> < < > <
ZONE2 Front
left speaker left speaker (B)

Connecting the pre-out terminals

• Use these terminals if you wish to connect external power amplifier(s) to increase the power of the front,
center, surround and surround back sound channels, or for connection to powered loudspeakers.
• When using only one surround back speaker, connect it to left channel.
>
Surround
left speaker
(A)
( L )
< >

Connecting the power supply cord

>
Surround
NOTE:
• Only use the AC OUTLET for audio equipment. Never use them for hair driers, TVs or other electrical
appliances.
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
19
ENGLISH
Connecting Other Sources
Power amplifier
B
CENTER
A
SURROUND
BACK
L L
L
R R
R
A
SURROUND
L L
L
R R
R
B
SUB-
WOOFER
A
FRONT
L L
L
R R
R
Power supply cord
(Supplied)
AC outlets
(wall)
AC 230V, 50Hz
AC OUTLET
• SWITCHED (total capacity – 100 W)
The power to the outlet is turned on and off in
conjunction with the POWER switch on the main unit,
and when the power is switched between on and
standby from the remote control unit.
No power is supplied from this outlet when this
unit's power is at standby. Never connect equipment
whose total capacity is above 100 W.