Connecting Other Sources
Connecting the external inputs (EXT. IN) terminals
• These terminals are for inputting multi-channel audio signals from an outboard decoder, or a component with
a different type of multi-channel decoder, such as a DVD Audio player, or a multi-channel Super Audio CD player,
or other future multi-channel sound format decoder.
• The method of video signal connection is the same as that for DVD player (
• For instructions on playback using the external input (EXT. IN) terminals (
• Playback using the DENON LINK connector Digital transfer and multi-channel playback of DVD audio discs and
other multi-channel sources is possible by connecting the AVC-A11XV to a DENON DVD player equipped with
a DENON LINK connector using the connection cable included with the DVD player.
• With discs on which special copyright protection measures have been taken, however, the digital signals may
not be output from the DVD player. In this case, connect the DVD player's analog multi-channel output to the
AVC-A11XV's EXT. IN terminals for playback. Also refer to your DVD player's operating instructions.
Connecting a video camera component or video game component
• For best picture quality choose the component video connection to your DVD recorder. S-video and composite
page 7).
• If you wish to perform analog dubbing from a digital sources, such as a DVD recorder to an analog recorder
page 21).
DVD Audio-Video /
Super Audio CD Player /
External decoder
A
7.1ch AUDIO OUT
FRONT
L
L
L
R
R
R
B
CENTER
A
SURROUND
BACK
L
L
L
R
R
R
A
SURROUND
L
L
L
R
R
R
B
SUB-
WOOFER
Video camera /
Video game
H
VIDEO
OUT
A
AUDIO OUT
L
L
L
R
R
R
D
OPTICAL
OUT
I
S VIDEO
OUT
14
ENGLISH
Connecting a DVD recorder
video outputs are also provided. If you choose to use the component video connection, it needs to be assign.
For more information about Component Input Assignment (
such as a cassette deck, you will needs connect analog inputs and outputs as shown below, in addition to the
digital audio connections.
NOTE:
• When recording to DVD recorder, it is necessary that the type of cable used with the playback source
equipment be the same type that is connected to the AVC-A11XV VCR-1 (to 3) OUTPUT terminal.
(Example)
VCR-1 IN
S-video cable : VCR-1 OUT
VCR-1 IN
video cable : VCR-1 OUT
• Do not connect the output of the component connected to the OPTICAL 2 OUT terminal on the AVC-
A11XV's rear panel to any terminal other than the OPTICAL 2 IN terminal.
ENGLISH
Connecting Other Sources
page 45).
DVD recorder
I
S VIDEO
OUT
H
VIDEO
OUT
J
COMPONENT VIDEO OUT
Y
P
B
P
R
H
VIDEO
IN
I
S VIDEO
IN
A
AUDIO IN
L
L
L
R
R
R
D
OPTICAL
IN
D
OPTICAL
OUT
A
AUDIO OUT
L
L
L
R
R
R
S-video cable
video cable