Setting The Crossover Frequency Individually For The Different Channels; Selecting The Surround Speakers For The Different Surround Modes; Settings For Using A Thx Ultra2; Compatible Subwoofer - Denon AVC-A11XV Operating Instructions Manual

Advanced Setup – Part 2
2
CURSOR F F G G
Press the or button to
select the frequency.
FIXED –THX–:
Set to the THX rated 80 Hz crossover frequency.
VARIABLE 40, 60, 80, 90, 100, 110, 120, 150, 200,
250 Hz:
Set as desired according to your speakers' bass
playback ability.
Advanced:
The crossover frequency can be set individually for
the different speakers ( page 56).
3
ENTER
Press the button to enter the
setting.
• The "Speaker Setup" menu reappears.
• If "LFE+Main" is set at "Subwoofer Setup",
"SW:LFE+Main" ( page 53, 54) is displayed at
the top right of the screen.
• Please set all THX Certifies speakers to small and
the crossover to 80Hz.
• We recommend using with the crossover frequency
set to "FIXED–THX–", but depending on the
speaker, setting it to a different frequency may
improve frequency response near the crossover
frequency.
• The crossover frequency mode is valid only when
subwoofer is set to ON, and when one or more
speakers are set to SMALL, as described in section
"Speaker Configuration" settings ( page 53).
Setting the crossover frequency
individually for the different channels
1
CURSOR F F G G
Press the or button to
select the "Advanced" at the "Crossover
Frequency" screen.
2
CURSOR D D H H
Press the or button to
select the speaker to be set.
3
CURSOR F F G G
Press the or button to
select the frequency.
• If "LFE–THX–" is selected at "Subwoofer Setup",
the frequencies can only be selected for speakers
set to "Small" at "Speaker Configuration".
• If "LFE+Main" is set at "Subwoofer Setup", the
frequencies can be selected regardless of the
speaker size setting.
Selecting the surround speakers for
the different surround modes
• This menu is displayed when both surround
speakers A and B are used.
• At this screen preset the surround speakers to be
used in each surround modes.
1
CURSOR D D H H
Press the or
select the "Surround Sp Setup" at the
"Speaker Setup" menu, then press the
ENTER
button.
• Display the "Surround Sp Setup" screen.
2
CURSOR D D H H
Press the or
select the surround mode, then press the
CURSOR F F G G
or button to select the
surround speaker.
A:
When surround speakers A is used.
B:
When surround speakers B is used.
A + B:
When both surround speakers A and B are used.
3
ENTER
Press the button to enter the
setting.
• The "Speaker Setup" menu reappears.
• For the "WIDE SCREEN" and "7CH STEREO" DSP
simulation modes, the surround speakers can be set
separately.
2 About Speaker type setting when
using both surround speakers A and
B
If "Small" is set for either surround speakers A or B,
the output is the same as when "Small" is set for both
A and B.
56
ENGLISH
Advanced Setup – Part 2

Settings for using a THX Ultra2

compatible subwoofer

Make these settings when "Yes" is selected for the
subwoofer in the "Speaker Configuration" settings.
There is not displayed when "No" selected (
page 53).
1
button to CURSOR D D
Press the
select the "THX Audio Setup" at the
"Speaker Setup" menu, then press the
ENTER
button.
• Display the "THX Audio Setup" screen.
2
button to CURSOR D D
Press the
select the "Boundary
Compensation", then press the
button.
3 CURSOR F F
Press the or
using a THX Ultra2 compatible
subwoofer or subwoofer that frequency
response extends to 20 Hz, select "Yes".
Otherwise select "No".
ENGLISH
H H
or button to
H H
or button to
Gain
ENTER
G G
button, when