Surround Back Speaker Position Settings; Others Setup; Setting The Room Eq Setup - Denon AVC-A11XV Operating Instructions Manual

ENGLISH
Advanced Setup – Part 2
When "Yes" is selected:
"Boundary Gain Compensation" can be selected
and the compensation set to "OFF".
If the bass sound seems too strong:
Set "Boundary Gain Compensation" to "ON".
This activates a filter that gently reduces very
deep bass below 55 Hz to provide the flattest
overall deep bass response. Select "ON" or
"OFF" according to how strong you prefer the
deep bass response to be.
4
ENTER
Press the button.
• Return to the "THX Audio Setup" screen.
Surround back speaker position
Settings
• When two surround back speakers have been set in
"Speaker Configuration" ( page 53), set the
distance of the speakers. There is not displayed
when "1spkr" selected.
• This setting is necessary to achieve the optimum
effect in the THX Surround EX, THX Ultra2 Cinema,
THX Music mode and THX Games mode. It is
recommended that SBL/SBR speakers are placed
together as close as possible.
1
CURSOR D D H H
Press the or
select the "Surround Back Speaker
Position" at the "THX Audio Setup"
ENTER
screen, then press the
2 CURSOR F F
Press the
select the settings according to the
distances of the two surround back
speakers ( page 54 :
ENTER
press the button.
• Return to the "THX Audio Setup" screen.
3 CURSOR D D
Press the
select the "Exit", then press the
button.
• Return to the "Speaker Setup" menu
screen.
4
CURSOR D D
Press the
select the "Exit", then press the
button.
• The "System Setup Menu" reappears.
button to
button.

Others Setup

G G
or button to

Setting the Room EQ Setup

L11 ), then
Select the setting of an Equalizer that has been set
with Auto Setup or Manual EQ.
1
CURSOR D D
Press the
select the "Room EQ Setup" at the
"Auto Setup / Room EQ" menu, then
ENTER
press the
• Display the "Room EQ Setup" screen.
H H
or button to
ENTER
2
CURSOR F F
Press the
select the "All" or "Assign".
All:
Sets the Equalizer for all surround modes.
Assign:
H H
or button to Sets the Equalizer individually for each surround
ENTER
mode.
3 When "All" is selected:
q Press the ENTER
-1
• Display the "Select the EQ Curve"
screen.
w Press the CURSOR F F
select the Equalizer setting.
OFF:
The Equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to
correct the effects of room acoustics.
57
ENGLISH
Front:
Adjusts the frequency response of the surround
speakers to match the characteristics of the front
channel speakers.
H H
or button to Flat:
Adjusts the frequency response of all speakers to
the flattest response. This mode is suitable for
multi-channel music surround sound sources.
button.
Manual:
Selects the setting value that was set in the
Manual EQ Setup.
For details of the "Setting the Manual EQ Setup"
( page 48).
3
When "Assign" is selected:
After completing system setup, select
the desired equalizer setting using the
-2
ROOM EQ
G G
or button to
• Equalizer settings for the individual surround
modes can be stored in the memory.
Whenever the ROOM EQ button is pressed, the
display switches as shown below.
OFF
4
Press the
setting.
• The "Auto Setup / Room EQ" menu
button.
reappears.
• The Equalizer setting of "Audyssey", "Front" and
"Flat" can be selected after performing the Auto
Setup.
• When the speaker set as "None" with the Auto
Setup is changed to on manually, the equalizer of
"Audyssey", "Front" and "Flat" cannot be used.
G G
or button to • The Equalizer setting can be selected directly by
ROOM EQ button.
• When headphones are connected, the Room EQ
cannot be used.
Advanced Setup – Part 2
button.
Audyssey Front
Manual Flat
ENTER
button to enter the