Fader Function; Advanced Operation; Remote Control Unit; Operating Denon Audio Components - Denon AVC-A11XV Operating Instructions Manual

Basic Operation

Fader function

This function makes it possible to lower the volume of
the front channels (FL, C and FR) or the rear channels
(SL, SR, SBL and SBR) together. Use it for example to
adjust the balance of the sound from each position
when multi-channel music sources are played.
1
ENTER
Press the button.
• Display the "Channel Vol." screen.
2
CURSOR D D H H
ENTER
Press the , or
button to select "Fader".
The channel switches in the order shown below
each time the ENTER button is pressed.
FL C FR SW SR
FADER SL SBL SBR
3
CURSOR F F
Press the button to reduce
the volume of the front channels, the
CURSOR G G
button to reduce the volume
of the rear channels.
Example: When "FRONT" is selected
The fader function does not affect the subwoofer
channel.
• The channel whose channel level is adjusted lowest
can be faded to –12 dB using the fader function.
• If the channel levels are adjusted separately after
adjusting the fader, the fader adjustment values are
cleared, so adjust the fader again.

Advanced Operation

Remote control unit

MODE SELECTOR
Operating DENON audio
components
1
MODE SELECTOR
Press the
select the component you want to
operate.
The function switches as shown below each
time one of the MODE SELECTOR buttons is
pressed.
AMP/Z2 : AMP, ZONE2
Z3/Z4 : ZONE3, ZONE4
TUN/D-TU : TUNER, D-TUNER*
CD/CDR : CD, CDR
TV/DBS : TV, DBS
VCR1/VCR2 : VCR1,VCR2
VDP : VDP
DVD/DVDR : DVD,DVDR
(* : This mode is for future use.)
Example:
Select "AMP" mode.
Select "ZONE2" mode.
32
ENGLISH
2
Operate the audio component.
For details, refer to the component's operating
instructions.
It may not be possible to operate some models.
3
2 SOURCE MENU
Operate the source.
buttons to
2 SURROUND MENU
Operate the "Surround" mode.
2 NUMBER /
SYSTEM CALL MENU
Operate the "Number" or "System call"
mode.
ENGLISH