System Setup Items And Default Values - Denon AVC-A11XV Operating Instructions Manual

ENGLISH
Advanced Setup – Part 2
System setup items and default values (set upon shipment from the factory)
1. Auto Setup/Room EQ
Auto Setup / Room EQ
This unit performs an analysis of the speaker system and measures the
1 Auto Setup acoustic characteristics of your room to permit an appropriate automatic
setting.
Room EQ
2 Set the Room EQ setting with "All" or "Assign" for each surround mode.
Setup
Direct Mode
Set the ON/OFF setting of Room EQ, in the case of the surround mode
3
is in "Direct" or "Pure Direct".
Setup
Mic Input
Set this to switch the Mic Input jack for use for "Mic" or "V.AUX L"-
4
channel input terminal.
Select
2. Speaker Setup
Speaker Setup
Input the combination of speakers in your system and their corresponding
Speaker sizes (SMALL for regular speakers, LARGE for full-size, full-range) to
1
Configuration automatically set the composition of the signals output from the speakers
and the frequency response.
Subwoofer
2 This selects the subwoofer for playing deep bass signals.
Setup
This parameter is for optimizing the timing with which the audio signals
3 Delay Time are produced from the speakers and subwoofer according to the listening
position.
Channel This adjusts the volume of the signals output from the speakers and
4
Level subwoofer for the different channels in order to obtain optimum effects.
Crossover Set the frequency (Hz) below which the bass sound of the various
5
Frequency speakers is to be output from the subwoofer.
Use this function when using multiple surround speaker
Surround combinations for more ideal surround sound. Once the
6 Speaker combinations of surround speakers to be used for the
Setup different surround modes are preset, the surround speakers
are selected automatically according to the surround mode.
Boundary Gain When using a THX Ultra2 compatible subwoofer, set the
compensation subwoofer's frequency response.
THX Audio
7
Setup
Surround Back
When using two surround back speakers, set the
Speaker
distance of the two speakers.
Position
Default settings
–
All, Room EQ = OFF
OFF
Mic
Default settings
Front Sp. Center Sp. Subwoofer
Small Small Yes
LFE —THX—
Front
Center Subwoofer
L & R
3.6 m (12 ft) 3.6 m (12 ft) 3.6 m (12 ft)
Front Front
Center Surround L Surround R
L R
0 dB 0 dB 0 dB 0 dB 0 dB
FIXED —THX—
THX/DOLBY/ THX/DOLBY/ THX/
Surround
mode DTS CINEMA DTS MUSIC DOLBY GAME
Surround
A A A
speaker
THX Ultra2 Subwoofer = NO
The Distance Between SBL/SBR = 0 m to 0.3 m (0 ft to 1 ft)
59
ENGLISH
Page
8 ~ 11
57
58
58
Page
Surround Sp. Surround Back
A / B Sp.
53
Small Small / 2spkrs
53, 54
Surround Surround Surround
L & R (A) L & R (B) Back
54
3.0 m (10 ft) 3.0 m (10 ft)
3.0 m (10 ft)
Surround Surround
Subwoofer
Back L Back R
54, 55
0 dB 0 dB 0 dB
55, 56
WIDE 7 CH DSP MULTI CH
SCREEN STEREO SIMULATION MODE
56
A A A A
56, 57
57
Advanced Setup – Part 2