Table of Contents
Advertisement
6.2 The Broadband Screen
Use this screen to change your ZyXEL Device's Internet access settings. Click Network Settings>
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the ZyXEL Device.
Figure 17 Network Settings > Broadband
The following table describes the labels in this screen.
Table 6 Network Settings > Broadband
LABEL
PTM over ADSL
Add new WAN
interface
#
Status
Name
Type
Encapsulation
VLAN
VPI/VCI
ATM QoS
IGMP Proxy
NAT
Default Gateway
Modify
P-873HNUP-51B User's Guide
DESCRIPTION
Select Enable to use PTM over ADSL. Since PTM has less overhead than ATM,
some ISPs use PTM over ADSL for better performance.
Click this button to create a new connection.
This is the index number of the entry.
This is the status of the connection.
This is the service name of the connection.
This shows whether it is a VDSL, ADSL, or Ethernet connection.
This is the method of encapsulation used by this connection.
This is the Virtual LAN (VLAN) number configured for this WAN connection.
This is the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers configured for this WAN connection.
This is the type of ATM QoS of the connection.
This shows whether the ZyXEL Device act as an IGMP proxy on this connection.
This shows whether NAT is activated or not for this connection.
This shows whether the ZyXEL Device use the WAN interface of this connection
as the system default gateway.
Click the Edit icon to configure the WAN connection.
Click the Delete icon to remove the WAN connection.
Chapter 6 Broadband
73
Advertisement
Table of Contents
