The Tr-064 Screen; The Snmp Agent Screen - ZyXEL Communications P873HNUP User Manual

Table 100 Maintenance > Remote MGMT > TR-069 Client (continued)
LABEL
Apply
Cancel

27.3 The TR-064 Screen

TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum. TR-064 is built on
top of UPnP. It allows the users to use a TR-064 compliant CPE management application on their
computers from the LAN to discover the CPE and configure user-specific parameters, such as the
username and password.
Click Maintenance > Remote MGMT > TR-064 Client to open the following screen.
Figure 124 Maintenance > Remote MGMT > TR-064 Client
The following table describes the fields in this screen.
Table 101 Maintenance > Remote MGMT > TR-064 Client
LABEL
Enable TR064
Apply
Cancel

27.4 The SNMP Agent Screen

Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL Device
supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an
SNMP management operation.
P-873HNUP-51B User's Guide
DESCRIPTION
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select the check box to activate management via TR-064 on the LAN.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 27 Remote Management
247