Table of Contents
Advertisement
Chapter 4 Tutorials
In this example, the DSL connection has the following information.
2
General
Connection Name
Type
Connection Mode
Encapsulation
ATM PVC Configuration
VPI/VCI
Encapsulation Mode
Service Category
Account Information
PPP User Name
PPP Password
PPPoE Service Name
Static IP Address
Others
Select the Active check box. Enter the General and ATM PVC Configuration settings as provided
3
above.
Set the Type to ADSL over ATM.
Choose the Encapsulation specified by your DSL service provider. For this example, the service
provider requires a username and password to establish Internet connection. Therefore, select
PPPoE as the WAN encapsulation type.
Enter the account information provided to you by your DSL service provider.
4
Configure this rule as your default Internet connection by selecting the Apply as Default Gateway
5
check box. Then select DNS as Static and enter the DNS server addresses provided to you, such as
192.168.5.2 (DNS server1)/192.168.5.1 (DNS server2).
40
MyDSLConnection
ADSL over ATM
Routing
PPPoE
36/48
LLC/SNAP-Bridging
UBR without PCR
1234@DSL-Ex.com
ABCDEF!
MyDSL
192.168.1.32
PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enabled
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
