Table of Contents
Advertisement
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the ZyXEL
Device to its factory defaults. The following warning screen appears.
Figure 137 Reset Warning Message
Figure 138 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your ZyXEL
Device. Refer to
31.3 The Reboot Screen
System restart allows you to reboot the ZyXEL Device remotely without turning the power off. You
may need to do this if the ZyXEL Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the ZyXEL Device reboot. This does not affect
the ZyXEL Device's configuration.
Figure 139 Maintenance > Reboot
P-873HNUP-51B User's Guide
Section 1.6 on page 26
for more information on the RESET button.
Chapter 31 Configuration
261
Advertisement
Table of Contents
