Table of Contents
Advertisement
Chapter 7 Wireless
Table 19 Network Settings > Wireless > WPS (continued)
LABEL
Release
Configuration
Generate New
PIN Number
Apply
Cancel
7.6 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Settings > Wireless >
Others. The screen appears as shown.
See
Section 7.7.2 on page 103
Figure 31 Network Settings > Wireless > Others
The following table describes the labels in this screen.
Table 20 Network Settings > Wireless > Others
LABEL
RTS/CTS
Threshold
Fragmentation
Threshold
Number of
Wireless
Stations Allowed
100
DESCRIPTION
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the ZyXEL Device.
The PIN (Personal Identification Number) of the ZyXEL Device is shown here.
Enter this PIN in the configuration utility of the device you want to connect to
using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the ZyXEL Device create
a new PIN.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
DESCRIPTION
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
Enter a value between 0 and 2347.
This is the maximum data fragment size that can be sent. Enter a value between
256 and 2346.
Specify the maximum number of the wireless stations that may connect to the
ZyXEL Device.
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
