Table of Contents
Advertisement
Chapter 27 Remote Management
Click Maintenance > Remote MGMT > TR-069 Client to open the following screen. Use this
screen to configure your ZyXEL Device to be managed by an ACS.
Figure 123 Maintenance > Remote MGMT > TR-069 Client
The following table describes the fields in this screen.
Table 100 Maintenance > Remote MGMT > TR-069 Client
LABEL
Inform
Inform Interval
ACS URL
ACS User Name
ACS Password
WAN Interface
used by TR-069
client
Display SOAP
messages on serial
console
Connection
Request
Authentication
Connection
Request User
Name
Connection
Request Password
Connection
Request URL
246
DESCRIPTION
Select Enable for the ZyXEL Device to send periodic inform via TR-069 on the
WAN. Otherwise, select Disable.
Enter the time interval (in seconds) at which the ZyXEL Device sends
information to the auto-configuration server.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 user name for authentication with the auto-configuration
server.
Enter the TR-069 password for authentication with the auto-configuration
server.
Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, you should also select the pre-configured WAN
connection(s).
Select Enable to show the SOAP messages on the console.
Select this option to enable authentication when there is a connection request
from the ACS.
Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this user
name is used to authenticate the ACS.
Enter the connection request password.
When the ACS makes a connection request to the ZyXEL Device, this password
is used to authenticate the ACS.
This shows the connection request URL.
The ACS can use this URL to make a connection request to the ZyXEL Device.
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
